Abstract
This study aimed to investigate morphological changes in the mandible of subjects in archaeological collections associated with the presence of bony exostoses at the mandibular angle, which are described in the literature as related to specific behaviours of the manducatory apparatus like parafunctional activities. The skeletal sample investigated comprised adult individuals from two archaeological series. Sixteen measurements of the mandible were selected to evaluate anatomic variation in the two populations. Mandibles from both series were pooled for statistical analysis into two groups according to the number of exostoses at the mandibular angles: group 1 (number of exostoses ≤1) and group 2 (number of exostoses ≥ 2). Measurements could be made on eighty mandibles. A statistically significant difference was demonstrated between group 1 and group 2 for the following parameters: distance between mandibular angles, bicondylar width, ramus height, left condyle length, right and left coronoid process height. For each of these parameters, values were higher in group 2 than in group 1. This study presents an original methodology for studying anatomical variations of the mandible in the context of parafunctional activity, highlighting certain mandibular modifications. The impact of parafunctional behaviours such as bruxism on the mandible therefore has many anatomical expressions. The considerable variability of results found in the literature shows that more studies are needed to reach a consensus on the impact of parafunctional activities on the mandible.
Introduction
The mandible, the only mobile bone in the skull, consists of three parts: the body (corpus) and two rami, connected by two mandibular angles. Like all skeletal bones, the mandible is constantly remodelled under the effect of several factors, which may be systemic (e.g. hormones, growth factors) or local (e.g. mechanical stresses) resulting from the action of the muscles of the manducatory apparatus [1–3]. Several muscles insert on the mandible to support the functions of mastication, swallowing, phonation, and emotion management. These include the mandibular elevator and depressor muscles, and those responsible for mandibular propulsion [4], which insert at various mandibular levels and connect the mandible to the facial skeleton.
Bone remodelling induced by mechanical stress was described as early as 1892 by Wolff, who noted that “bone in a healthy person or animal adapts to the forces to which it is subjected”[5]. Bone can respond locally to the mechanical stresses to which it is subjected, via cellular adaptation mechanisms [6]. Several types of bone response have been described. If appropriate mechanical stresses are applied, bone mass may increase. However, if the mechanical stresses applied are too great, there may be a reduction in bone mass through increased resorption, with a risk of fatigue fracture. On the other hand, if the bone is not stressed, or is immobilised, it exhibits a high level of resorption with a concomitant reduction in bone formation [7].
Assessment of mandibular bone remodelling involves the evaluation of mandibular volume. Here, researchers have several options: the use of radiological imaging derived from medical activity, which requires the use of slices in all three spatial planes [8]; accessing bodies donated to science, which presents difficulties of access and implementation (e.g. preparation of parts); the study of archaeological series, which is dependent on the excavation conditions and state of preservation of the individuals recovered.
While the study of archaeological series deprives the researcher of access to certain data on the subjects investigated, it does allow measurements to be collected directly from the mandible, when its state of preservation permits. This has allowed the evaluation of mandibular markers, described in the literature as related to specific behaviours of the manducatory apparatus. This is the case for exostoses that may be present at the mandibular angles [9]. Their location corresponds to the lower insertion zones of the masseter muscle, the most powerful elevator muscle in the manducatory apparatus [10]. These exostoses develop when repeated muscular forces are applied through frequent contraction of the masseter muscles [11]. Several exostoses may be found at the same angle. The number of these exostoses reflects both the intensity of the forces exerted on the mandible in this area, and the high frequency with which these forces occur in the life of the individual, exceeding those ordinarily applied for manducatory functions alone, and potentially reflecting parafunctional behaviours established in the manducatory apparatus of the individuals observed [12].
This study aimed to investigate morphological changes in the mandible of subjects in archaeological collections associated with the presence of bony exostoses at the mandibular angle.
Materials and Methods
Skeletal samples
This study was conducted with ethical approval from the SRA DRAC-PACA, French Ministry of Culture. The skeletal sample investigated comprised adult individuals from two archaeological series, Les petites Crottes (Bouches-du-Rhône, Marseille, Old cemetery of Crottes, 2016, 10 461), and L’îlot Saint Jacques (Bouches-du-Rhône, La Ciotat, Carré Saint Jacques, 2011). Both collections are held at the SRA DRAC PACA Osteotheque and were studied on site.
Description of archaeological sites
The Petites Crottes sample, dated from 1784 to 1905, was excavated from a parish cemetery in North Marseille, in southern France. Excavations took place in 2013 and 2014 [13]. The field study population consisted of 1,548 individuals; 532 subjects were studied in the laboratory [14]. Adult sex was evaluated in most cases by an assessment of the coxal bone using Bruzek’s morphoscopic method [15] and probabilistic sex diagnosis or PSD [16]. Age at death of adult subjects was estimated by noting the bone maturity status of the clavicle and the coxal bone, degenerative pathologies, and dental status (attrition, ante-mortem tooth loss, etc.). Adult subjects were divided into three age classes: young adults (20-39 years), mature adults (40-59 years), and elderly adults (> 60 years).
The Ilot Saint-Jacques sample came from a parish cemetery, in use from 1581 to 1831, in the town of La Ciotat, in southern France. Excavations took place in 2009 [17]. The population studied in the field comprised 1,245 individuals; 400 subjects were studied in the laboratory. Biological parameters were investigated using techniques identical to those described for the first series.
Sample selection
The first phase of selection of individuals from the subjects preserved in the SRA DRAC PACA Osteotheque was based on the individual osteological conservation sheets taken from the excavation reports for the two archaeological sites, according to the following criteria:
Subject inclusion criteria
- Adult individual,
- With or without a sex diagnosis,
- Presenting a completely intact mandible OR presenting a mandible with a single post-mortem bone fracture allowing anatomical reassembly of the two fragments present OR an incomplete
mandible missing a single mandibular anatomical element such as a condyle, coronoid process, or mandibular angle (right or left).
Criteria for non-inclusion of subjects
- Immature subject,
- Presence of temporary teeth on an arch,
- Mandible absent,
- Mandible deterioration: in more than two pieces, several fragments missing,
- Edentulous mandible (ante-mortem closure of dental sockets).
In the second phase the collections were examined, and the subjects listed in the initial excavation report file as meeting the inclusion criteria but presenting significant deterioration of the mandible objectified during the examination were excluded.
Methods
Measurements made on archaeological series
Some of the measurements made were based on previously defined procedures for dry bone, except for condylar and coronoid process measurements [18,19]. Sixteen measurements of the mandible were selected to evaluate anatomic variation in the two populations:
- Chin height, right side
- Corpus height, right side
- Corpus width, right side
- Bigonial breadth
- Bicondylar breadth
- Minimum ramus width, right side
- Maximum ramus height, right side
- Corpus length, right side
- Mandibular angle, both side
- Maximum width of right and left condyles
- Maximum length of right and left condyles
- Presence and number of exostoses at the mandibular angles
- Height of right and left coronoid processes
Measurements and their definitions are indicated in Figs 1a, 1b, 1c and 1d.
These measurements were performed by two calibrated operators. Measurements were recorded using sliding callipers, with readings being taken to the nearest 0.01 mm, while a mandibulometer was used to measure the mandibular angle. Not all measurements were recorded on every individual due to the incomplete or fragmentary condition of the remains. Nevertheless, most measurements could be recorded on all individuals. Measurements recorded on parts exhibiting taphonomic, traumatic, or pathologic changes were only included if they did not affect the measurement. The missing data rate for each parameter studied was recorded (ratio of the number of mandibles on which the parameter was measured to the total number of mandibles studied).
Statistical methods
Analyses were performed using R software (version 4.0.3), available at https://www.r-project.org.
Evaluator calibration
To check evaluator reliability (intra-operator variability) and method reproducibility (inter- operator variability), a Bland–Altman agreement test was performed on quantitative data, and a weighted Cohen’s Kappa test was run on the presence of bony exostoses at the mandibular angle, as the test was carried out on two ordinal samples.
Sample analysis
Mandibles from both series were pooled for statistical analysis. These were divided into two groups according to the number of exostoses at the mandibular angle:
- Group 1: total number of exostoses at the two mandibular angles, 0 or 1.
- Group 2: total number of exostoses at the two mandibular angles, greater than or equal to 2.
The F-test for equality of two variances was used to verify normal distribution and the equality of variances between the two groups.
An analysis was carried out on the whole sample using Welch’s t-test to study the correlations between the presence of exostoses at the mandibular angle and the dimensional variation of the 15 mandibular parameters investigated.
Results
Sample composition
Measurements could be made on only 50 of the 102 adult subjects in the Petites Crottes series, selected initially on the basis of the excavation report.
Measurements could be made on only 30 of the 43 adult subjects in the Ilôt St Jacques series selected initially on the basis of the excavation report.
Biological parameters and the number of exostoses found for the 80 subjects studied are shown in Fig 2.
The sample comprised 29 males, 19 females, and 32 subjects of undetermined sex.
Of these, 42 had a total of 0 or 1 mandibular angle exostoses for both angles (group 1), and 38 had a total of 2 or more mandibular angle exostoses for both angles (group 2).
Evaluator calibration
There was a good agreement of all 1200 quantitative measurements made by the two operators (Bland–Altman tests), both in terms of repeatability for each operator (Figs 3 and 4) and inter-operator reproducibility (Fig 5).
In addition, agreement was obtained for the count of mandibular angle exostoses with excellent reproducibility (Weighted Cohen’s Kappa coefficient = 0.94 for the right side and 0.96 for the left side).
Sample analysis
The characteristics of the 15 parameters recorded for the 80 mandibles in the sample are shown in Table 1.
The conditions for the application of Welch’s t-test were checked for each group using an F-test for equality of variance between the two groups, and the normality of the distribution was checked using the Q-Q plot graphical method.
The statistical analysis of the overall sample using Welch’s t-test, to investigate correlations between the presence of bony exostoses at the mandibular angle and significant dimensional variation in the 15 mandibular parameters investigated, is presented in Table 2.
A statistically significant difference was demonstrated between group 1 (number of exostoses ≤1) and group 2 (number of exostoses ≥ 2) for the following parameters: distance between mandibular angles, bicondylar width, ramus height, left condyle length, right and left coronoid process height. For each of these parameters, values were higher in group 2 than in group 1.
Discussion
This study aimed to assess the presence of morphological changes in the mandible associated with the presence of bony exostoses at the mandibular angles. It was carried out on subjects recovered by archaeological excavation from two cemeteries located in the same geographical area (the city of Marseille and surrounding area, in southern France), in two series situated in the modern and contemporary historical periods.
The selection of these series was motivated by the desire to carry out a diachronic study on archaeological series presenting comparable geographical and environmental conditions, to limit the impact of extrinsic factors likely to have affected the state of health of the subjects buried in these cemeteries.
The archaeological series approach in itself denies researchers access to information relating to the behaviours adopted by subjects during their lifetime. However, this approach allows researchers to apprehend and measure distances directly, and even to evaluate volumes, freeing them from the potential bias in reconstructing cross-sections and volumes that is inherent in radiological techniques. The latter are particularly useful for assessing internal bone parameters such as bone density, as they avoid the need to destroy tissue to collect data; these two approaches therefore appear to be complementary for study of the mandible. Data collection was closely impacted by the state of preservation of subjects and considerable variability was noted both in the number of bone pieces found during excavation and in their state of preservation in situ and then in the laboratory. Thus, while archaeological series provide access to collections of bone remains, the authors had to work with missing data, all of which represent a source of potential bias, as not all mandibles present an optimal level of preservation. Furthermore, in order not to introduce any additional bias, teeth, which are often used in the archaeological study of mandibles, were excluded from data collection, as mandibles were often found without all teeth in situ: the collection of parameters such as wear or carious lesions appeared too random to be exploitable for statistical purposes.
The 80 mandibles were divided into two groups according to the number of mandibular exostoses counted at both mandibular angles. It was decided that a subject with a unilateral exostosis associated with the absence of an exostosis at the contralateral angle would be grouped with individuals with no exostosis at either angle, as this isolated exostosis alone could not reflect overactivity of the masticatory muscles. Thus, the presence of at least two exostoses was chosen as more likely to distinguish a parafunctional increase in mandibular activity from ordinary manducatory activity. [20,21].
The mandibular characteristics associated with the presence of exostoses at the mandibular angle have been studied in the literature. Indeed, several studies [9,20,22] associate the presence of mandibular exostoses with the expression of a parafunctional activity called bruxism, which reflects intense activity of the muscles of the manducatory apparatus. Other articles focus on the development of mandibular tori, which are oral exostoses located on the medial aspect of the mandibular arch. Research has also shown that signs of parafunctional activity are associated with the presence of mandibular tori [23].
The impact on the mandible of these parafunctional muscular activities associated with bruxism has been the subject of various published studies, based mainly on two-dimensional medical imaging, and involving the analysis of panoramic radiographs. Morphological changes in the mandible have been described, which sometimes contradict the data collected in this study. As a reminder, the study of archaeological collections has highlighted several morphological changes in the mandible, relating to parameters such as the distance between the mandibular angles, bicondylar width, ramus height, left condyle length, and right and left coronoid process height. The values of all these parameters were increased in subjects with multiple exostoses at the mandibular angles. These changes affected several anatomical regions of the mandible.
Various results have been presented for the condylar region of the mandible: the present study showed an increase in the length of the left mandibular condyle; one study [24] found no significant difference; several others [25–27] showed a reduction in condylar dimensions. This result should be treated with caution, as it was demonstrated for the left condyle only. Measurements of right condyle length, as well as maximum condyle widths on both sides, showed no statistically significant difference between the two groups. Furthermore, many factors have been described in the literature as inducing variations in mandibular condyle shape, such as age, gender, facial typology, and intermaxillary dental relationships [28,29]. This ability to remodel the shape of the condyle reflects its functional adaptation throughout an individual’s life, and the resulting modifications are often described as asymmetrical.
A bilateral increase in dimensions was found in the coronoid process region in this study. This is corroborated by the study of Cezairli and al. [30]; Padmaja Satheeswarakumar et al. [25] observed coronoid process measurements in bruxers that were significantly smaller on the right but larger on the left. A possible explanation for this size increase could relate to the insertion of the temporalis muscle and the deep fascicle of the masseter muscle on the lateral aspect of the coronoid processes: sustained muscular activity could explain the higher level of bone development found in patients with multiple exostoses.
Finally, this study reported an increased distance between the mandibular angles and between the lateral poles of the condyles in subjects with multiple exostoses compared to the other group. Although these measurements were not collected in the medical imaging studies, it is possible to advance an explanatory hypothesis based on knowledge of mandibular biomechanics. Indeed, Van Eijiden [31] reported that during contraction of the elevator muscles, the mandible undergoes lateral flexion in the transverse direction, resulting in lateral torsion of the lower mandibular border. It thus seems possible to suggest that repetition of these muscle contractions over time has resulted in a widening of the intercondylar distance, and consequently an increased intercondylar distance due to the anatomical configuration of the mandible.
Conclusion
This study presents an original methodology for studying anatomical variations of the mandible in the context of parafunctional activity, highlighting certain mandibular modifications. The presence of bilateral mandibular exostoses was correlated with higher values for the distance between mandibular angles, bicondylar width, ramus height, left condylar length, and right and left coronoid process height.
The variations observed corroborated certain results present in the international literature. In addition, we did not investigate certain characteristics, such as bone density, by observation of trabecular bone, as study of the collections required the use of non-invasive methods. The use of imaging examinations could represent a potentially valuable research approach, whether applied to archaeological series or patient cohorts. Mandibular bone density has been analysed on panoramic X- rays, and the use of three-dimensional imaging, such as CBCT, which avoids the reconstruction bias and distortions of two-dimensional examinations, would appear to be a sensible option for future research, both in terms of bone density and morphological variations.
The impact of parafunctional behaviours such as bruxism on the mandible therefore has many anatomical expressions. The considerable variability of results found in the literature shows that more studies are needed to reach a consensus on the impact of parafunctional activities on the mandible.
Author contributions
EC: Conceptualization, Investigation, Methodology, Writing BB: Investigation and Formal Analysis
YA: Project Administration and Resources CPA: Visualization
AR: Methodology, Supervision and Validation
Data Availability
All relevant data are within the manuscript and its Supporting Information files.