Accurate Non-invasive Mass and Temperature Quantifications with Spectral CT

Abstract

Spectral CT has been increasingly implemented clinically for its better characterization and quantification of materials through its multi-energy results. It also facilitates calculation of physical density utilizing the Alvarez-Macovski model without approximations. These spectral physical density quantifications allow for non-invasive mass measurements and temperature evaluations by manipulating the definition of physical density and thermal volumetric expansion, respectively. To develop the model, original and parametrized versions of the Alvarez-Macovski model and electron density-physical density model were validated with a phantom. The best physical density model was then implemented on clinical spectral CT scans of ex vivo bovine muscle to determine the accuracy and effect of acquisition parameters on mass measurements. In addition, the relationship between physical density and changes in temperature was evaluated by scanning and subjecting the tissue to a range of temperatures. A linear fit utilizing the thermal volumetric expansion was performed to assess the correlation. The parametrized Alvarez-Macovski model performed best in both model development and validation with errors within ±0.02 g/mL. As observed with muscle, physical density was not significantly affected by dose and acquisition mode but was slightly affected by collimation. These effects were also reflected in mass measurements, which demonstrated accuracy with a maximum percent error of 0.34%, further validating the physical density model. Furthermore, physical density was strongly correlated (R of 0.9781) to temperature changes through thermal volumetric expansion. Accurate and precise spectral physical density quantifications enable non-invasive mass measurements for pathological detection and temperature evaluation for thermal therapy monitoring in interventional oncology.