Abstract
The worldwide outbreak of the COVID-19 drastically increased pressure on medical resources and highlighted the need for rapidly available, large-scale and low-cost personal protective equipment (PPE). In this work, an alternative full-face mask is adapted from a modified snorkel mask to be used as PPE with two medical grade filters and a 3D-printed adapter. As the mask covers the eyes, mouth and nose, it acts as a full-face shield, providing additional protection to healthcare workers. The filtration efficiency of different medical filters is measured for particles below 300 nm to cover the size of the SARS-CoV-2 and small virus-laden droplets. The filtration performance of the adapted full-face mask is characterized using NaCl particles below 500 nm and different fitting scenarios. The mask is compared to a commercial respirator and characterized according to the EN 149 standard, demonstrating that the protection fulfills the requirements for the FFP2 level (filtering face-piece 2, stopping at least 94% of airborne particles). The device shows a good resistance to several cycles of decontamination (autoclaving and ethanol immersion), is easy to be produced locally at low cost and helps addressing the shortage in FFP2 masks and face shields by providing adequate protection to healthcare workers against particles below 500 nm.
Competing Interest Statement
The authors have declared no competing interest.
Funding Statement
The work was partially supported by Innosuisse project 46668.1 IP-ENG ReMask: Strategies for innovations for Swiss masks needed in pandemic situations.
Author Declarations
I confirm all relevant ethical guidelines have been followed, and any necessary IRB and/or ethics committee approvals have been obtained.
Yes
The details of the IRB/oversight body that provided approval or exemption for the research described are given below:
No IRB necessary, informed consent has been obtained from the volunteers wearing the mask.
All necessary patient/participant consent has been obtained and the appropriate institutional forms have been archived.
Yes
I understand that all clinical trials and any other prospective interventional studies must be registered with an ICMJE-approved registry, such as ClinicalTrials.gov. I confirm that any such study reported in the manuscript has been registered and the trial registration ID is provided (note: if posting a prospective study registered retrospectively, please provide a statement in the trial ID field explaining why the study was not registered in advance).
Yes
I have followed all appropriate research reporting guidelines and uploaded the relevant EQUATOR Network research reporting checklist(s) and other pertinent material as supplementary files, if applicable.
Yes
Data Availability
All data is available in the manuscript and upon request from the authors.
ABBREVIATIONS
- PPE
- personal protective equipment
- CPC
- condensation particle counter
- SMPS
- scanning mobility particle sizer
- MPPS
- most penetrating particle size
- DMA
- differential mobility analyzer
- HEPA
- high-efficiency particulate air
- ABS
- acrylonitrile butadiene styrene
- PMMA
- Poly(methyl methacrylate)
- HME
- heat and moisture exchanger
- SEM
- scanning electron microscope
