Keywords
Escherichia coli ST131, ExPEC, antimicrobial-resistant infection
Escherichia coli ST131, ExPEC, antimicrobial-resistant infection
Extra-intestinal pathogenic Escherichia coli, or ExPEC, is a major human pathogen and is the most common cause of urinary tract infections and the most common Gram-negative bacterium associated with bloodstream infections in both developed and developing countries1. Certain virulence factors (VFs) give ExPEC the means to cause disease. They include toxins, adhesions, lipopolysaccharides, capsules, proteases, and invasins and are important in colonization, which is often a precondition for virulence. However, the exact roles of these VFs have not been well defined.
Before the 2000s, ExPEC was mostly susceptible to first-line antibiotics (e.g. cephalosporins [cephs] and fluoroquinolones [FQs]) that are often used to treat infections2. A recent World Health Organization report states that resistance to the FQs (FQ-R) among E. coli is very widespread and, in many parts of the world, FQs are now ineffective in more than half of patients3. Of special concern is that FQ-R is often accompanied by resistance to the cephs (ceph-R), which is mainly due to the production of extended-spectrum β-lactamases (ESBLs), especially an enzyme named CTX-M-154.
A single ExPEC clone, sequence type (ST) 131, is predominantly responsible for this global FQ-R and ceph-R pandemic causing millions of antimicrobial-resistant (AMR) infections annually (e.g. up to 30% of all ExPEC, 60–90% of FQ-R ExPEC, and 40–80% of ESBL ExPEC belongs to ST131)5. Population genetics indicate that ST131 consists of different clades: clade A is associated mostly with fimH41, clade B with fimH22, and clade C with fimH30. The change in fimH alleles might improve colonization abilities of the different clades6. Global longitudinal studies showed that clade B was presiding among ST131 before the 1990s, but since the 2000s clade C has become the most dominant lineage (currently up to 80% of global ST131 belongs to clade C)5. Next-generation sequencing (NGS) identified two subclades within clade C named C1/H30R (associated with FQ-R) and C2/H30-Rx (associated with the ESBL CTX-M-15)6. Both subclades showed extensive global distribution. The aim of this article is to update readers on recent evolutionary aspects regarding E. coli ST131.
The acquisition of certain key genomic islands (GIs) with VFs that pre-dated the development of FQ-R in clade C possibly played a role in the successful global dissemination of subclades C1 and C2. This probably required a previous enrichment in C subclades and might be secondary to the change in fim alleles. ST131 clade C is defined by high-level FQ-R mutations in gyrA (gyrA1AB) and parC (parC1aAB) and differs from clade B by 70 substitution single-nucleotide polymorphisms (SNPs)6. Clade B is most often FQ susceptible and rarely carries plasmids with blaCTX-M-15, while clade C is mostly FQ-R and the C2 subclade is often associated with blaCTX-M-155.
Recent phylogenetic studies from Oxford, UK, and Brisbane, Australia, have shed some light regarding the origin and evolution of ST131 clade C7,8. Both studies used NGS to characterize over 400 global ST131 from clinical, environmental, and veterinary sources. They showed that clade C evolved from clade B and this most likely occurred during the late 1980s in North America (either the United States or Canada)7,8.
The Brisbane study also described a stepwise evolution process in which clade B was divided into five paraphyletic subclades and then sequentially acquired several prophages (Phi), GIs, the fimH30 allele, and mutations within gyrA and parC and evolved into clade C8. Each one of these acquisitions increased the population size and consequently extended the relational interactive field of the successive variants. They identified certain ST131 isolates that share characteristics of both clade B and clade C (these isolates are referred to as intermediate strains and named B0 [those isolates that shared more characteristics with clade B] and C0 [those isolates that shared more characteristics with clade C]). Analysis of clade B, intermediate strains B0 and C0, and subclades C1 and C2 identified intermediate patterns of recombination, primarily clustered around known mobile genetic elements, indicative of stepwise evolution among these intermediate strains (please refer to Figure 1 for details). The investigators from Brisbane noted the insertion of the Flag-2 locus in clade B, followed by the acquisition of different Phi (2, 3, and 4) leading to the emergence of intermediate strains B0. This process most likely occurred during the 1960s to 1970s. The authors then traced the acquisition of GI-pheV and GI-leuX and the recombination of parC1a to the most recent common ancestor of the intermediate strains C0 (i.e. parC1a is an allelic variant of the chromosomal parC gene that does not confer resistance to FQs). Strains that belonged to clade C0 were obtained several years before the emergence of subclades C1 and C2 (most likely during the late 1970s to early 1980s). GI-pheV is known to carry the autotransporter genes agn-43 and sat, the ferric aerobactin biosynthesis gene cluster (iucABCD), and its cognate ferric siderophore receptor gene iutA. The C clade-defining fimH30 allele was then acquired by recombination, most likely during the early–mid 1980s, possibly in conjunction with the acquisition of the nearby GI-leuX (Figure 1). The Oxford and Brisbane studies also showed that clade C instantly divided into subclades C1 and C2 after the acquisition of the high-level FQ-R mutations (via selection) in parC (parC1aAB) and gyrA (gyrA1AB) that defined clade C (Figure 1). This process transpired during the mid–late 1980s and coincided with the introduction of the FQs (especially ciprofloxacin) in clinical medicine.
FQ, fluoroquinolones; GI, genomic islands; Inc, incompatibility; Phi, prophages; ST, sequence types.
These results suggest that the acquisition of virulence-associated genes (e.g. sat and iutA), AMR genes (i.e. parC1a), and fimH30 in a stepwise process during the 1960s, 1970s, and early 1980s has primed ST131 for success prior to the acquisition of high-level FQ-R mutations in the late 1980s (Figure 1). It is unclear if subclade C2 contained blaCTX-M-15 at that time (it did contain IncF plasmids that are associated with CTX-M-15 [details below]). A molecular epidemiology study from Calgary, investigating the prevalence of ST131 clades over time, showed that subclade C2 became prominent only towards the end of the 2000s, suggesting that it took some time for C2 to acquire blaCTX-M-159.
Epidemic resistance plasmids that belong to incompatibility (Inc) groups with F replicons (named IncF) have the ability to acquire resistance genes and rapidly disseminate among Enterobacteriaceae10. IncF plasmids use post-segregation killing and addiction systems to ensure their propagation among high-risk clones such as ST131. The blaCTX-M-15 gene has mainly been found on certain IncF plasmids (especially with FIA-FII replicons) in ST131, whereas Inc plasmids with different replicons have been identified in non-ST131 ExPEC11,12. It has been postulated recently that the presence of IncF plasmids harboring blaCTX-M-15 is central to the global success of ST131 and that they have significantly contributed to the evolutionary dominance of subclade C213. The study from Oxford has shown the clear relationship of subclade C2 with IncFII_AY458016 containing blaCTX-M-15 and the pemI/pemK addiction system7.
A study from Minnesota, USA, characterized plasmids in a collection of 104 diverse (i.e. clinical, environmental, and veterinary) ST131 isolates14. They showed that the IncF variants differ among the C1 and C2 subclades: e.g. F1:A2:B20 replicons (without blaCTX-M-15) are associated with subclade C1, while F2:A1:B replicons (with blaCTX-M-15) are associated with subclade C219 (the F2:A1:B replicons correlate with IncFII_AY458016 described in the Oxford study). They then proposed a sequence of events leading to the current circulating plasmids within the C subclades. The initial step was the introduction of an F2:A1 plasmid type (without blaCTX-M-15) into either clade B0 or clade C0 (Figure 1). The C clade then evolved from C0 and separated into subclades C1 and C2 (as described above). Subclade C1 acquired the F1:A2:B2 plasmid, while the F2:A1:B plasmid in subclade C2 acquired AMR cassettes containing blaCTX-M-15, catB4, blaOXA-1, aac(6')Ib-cr, and tetAR via IS26-mediated events (Figure 1). Subsequently, in some C2 isolates, blaCTX-M-15 was integrated into the bacterial chromosome, while in other isolates the AMR cassettes were lost over time. It seems that the C1 and C2 subclades have co-adapted with these plasmids to carry them at lower cost to the bacterial cell and that the plasmids themselves are evolving toward fixation within these clades, playing important roles in the success of their hosts. Toxin–antitoxin systems ensure the plasmids’ persistence in the clonal backgrounds in which they are located, preventing promiscuity among different clades/lineages.
ExPEC with blaCTX-M-15 is rare in Japan despite the predominance of ST131 among ESBL-producing isolates15. Before 2005, ST131 clade C1 containing blaCTX-M-14 predominated among Japanese ST131 and since then has been replaced by clade C1 with blaCTX-M-27, which was responsible for a significant increase of ESBL-producing ExPEC in that country, especially since 201015.
A study from Kyoto, Japan, performed NGS on 43 Japanese and 10 global ST131 isolates with blaCTX-M-27, blaCTX-M-14, and blaCTX-M-15 to investigate the emergence of ExPEC with blaCTX-M-27 in that country16. The authors identified a discrete ST131:O75:H30 lineage that formed a distinct cluster within the C1 subclade and named it “C1-M27”, which was defined by a unique Phi-like region (M27PP1). Interestingly, subclade C1-M27 was responsible for the recent increase in ESBL-producing ExPEC from Japan and was also present among ST131 obtained from Thailand, Australia, Canada, and the USA, indicating that this subclade is not necessarily limited to Japan.
Previous clinical and ecological studies have shown that ST131 is relatively rare among animal ExPEC and seems to be an exclusively human pathogen5. Several in vitro studies performed during the 2000s identified distinctive VF profiles among ST131, with the C2 subclade often having the highest aggregative virulence scores17.
A multinational group of investigators analyzed the variations in the core, accessory, and regulatory genome regions in over 200 diverse ST131 isolates from avian species, domesticated animals, and humans to provide details on the ecology and evolution of this important ExPEC clone18. ST131 strains isolated from wild birds, cats, and dogs were distributed throughout the phylogenetic tree and did not cluster separately to the human isolates. This suggested that ST131 has the ability to move easily between species and advocates that ST131 is a host generalist capable of frequent inter-species movement. However, current molecular epidemiological data do not support this finding; ST131 is rare among environmental and veterinary isolates.
Variations in the ST131 accessory gene pool identified by the multinational study showed the existence of multiple subtypes within subclades C1 and C2 based on highly similar accessory gene profiles. This might explain in part the different in vitro VF profiles of ST131 that had previously been described by various investigators17.
AMR, either by mutation or the acquisition of resistance determinants on plasmids, confers a biological fitness cost to bacteria that can affect growth rate, survival abilities, and virulence capacities19. Some bacteria can undergo compensatory mutations to reduce this fitness cost, which allows resistant isolates to adapt, flourish, and spread19. The exact roles of compensatory mutations that offset the fitness costs associated with AMR are controversial and remain a relatively understudied area. Variations within gene regulatory regions of ST131 identified in the multinational study illustrated that the acquisition and maintenance of IncF plasmids by subclades C1 and C2 possibly occurred as a result of several compensatory mutations in the core genome of these isolates18. These compensatory mutations influence gene expression and minimize the fitness costs associated with the maintenance of AMR IncF plasmids. This would, in part, explain the ability of ST131 to retain IncF plasmids over time, even in the absence of antibiotic selection pressure. It is important to remember that it is not experimentally proven and that IncF plasmids are, in general, common among E. coli populations and therefore “well evolutionarily adapted”.
The population structure of ST131 has been explored extensively by numerous research groups worldwide. In contrast, studies of the biological mechanisms that enabled the success of ST131 are largely lacking13. It still remains unclear which features of ST131 clade C resulted in one of the most unprecedented AMR triumphs of the 2000s. The success of clade C was likely driven, in part, by the sequential acquisition of virulence factors, FQ-R, and ESBL production in an era when the use of FQs and oxyimino-cephs (especially the third-generation cephs) was increasing globally. The selection pressures created by the widespread use of these agents (i.e. FQs and oxyimino-cephs) have dramatically changed the population structure of ExPEC20. However, there are other ExPEC strains and clones (e.g. ST405) with the same AMR determinants and similar virulence gene profiles as ST131 but that do not share the success of clade C5.
Is E. coli ST131 clade C inherently more fit than other ExPEC clones or even other ST131 clades and therefore able to better survive in certain environments, even in the absence of antimicrobial selection pressures? Is this “fitness” due to certain VFs and compensatory mutations that provided clade C with opportunities to be exposed to and acquire certain IncF plasmids? It is also possible that the maintenance and co-evolution of subclades C1 and C2 with IncF plasmids containing F1:A2:B20 and F2:A1:B replicons, respectively, have provided rapid and continual adaptation opportunities for these subclades, providing them with the additional ability to outcompete other ExPEC clades. This is consistent with both the macro- and micro-evolutionary versions of the Red Queen hypothesis of co-evolution13. It is important to remember that this might be a very simplistic view regarding the role of IncF plasmids in the success of ST13 and this clone frequently harbors non-F AMR plasmids.
This is reminiscent of a famous quote from Stephen Hawking: “intelligence is the ability to adapt to change”. ST131 clade C adapted to environmental changes more rapidly than other ExPEC clones. The medical community needs to know why and how. Without a better mechanistic understanding of the unique adaptations of this important clade, the medical community is unlikely to stop its continuing spread or to anticipate the next clonal wave of multidrug-resistant ExPEC.
AMR, antimicrobial resistance; cephs, cephalosporins; ceph-R, cephalosporin resistance; ESBL, extended-spectrum β-lactamase; ExPEC, extra-intestinal pathogenic Escherichia coli; FQs, fluoroquinolones; FQ-R, fluoroquinolone resistance; GI, genomic island; Inc, incompatibility; NGS, next generation sequencing; Phi, prophage; ST, sequence type; VF, virulence factor.
JDDP has previously received research funds from Merck and Astra Zeneca. RdeV has no competing interests to declare.
This work was supported in part by a research grant from the Calgary Laboratory Services (#10015169).
The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Views | Downloads | |
---|---|---|
F1000Research | - | - |
PubMed Central
Data from PMC are received and updated monthly.
|
- | - |
Competing Interests: No competing interests were disclosed.
Competing Interests: No competing interests were disclosed.
Alongside their report, reviewers assign a status to the article:
Invited Reviewers | ||
---|---|---|
1 | 2 | |
Version 1 28 Feb 17 |
read | read |
Provide sufficient details of any financial or non-financial competing interests to enable users to assess whether your comments might lead a reasonable person to question your impartiality. Consider the following examples, but note that this is not an exhaustive list:
Sign up for content alerts and receive a weekly or monthly email with all newly published articles
Already registered? Sign in
The email address should be the one you originally registered with F1000.
You registered with F1000 via Google, so we cannot reset your password.
To sign in, please click here.
If you still need help with your Google account password, please click here.
You registered with F1000 via Facebook, so we cannot reset your password.
To sign in, please click here.
If you still need help with your Facebook account password, please click here.
If your email address is registered with us, we will email you instructions to reset your password.
If you think you should have received this email but it has not arrived, please check your spam filters and/or contact for further assistance.
Comments on this article Comments (0)