Dielectric barrier discharge (DBD) is a typical approach for producing non-thermal plasma
at atmospheric pressure. In this experimental study, the DBD is excited by repetitive unipolar …

High‐temperature capability is critical for polymer dielectrics in the next‐generation capacitors
demanded in harsh‐environment electronics and electrical‐power applications. It is well …

DBD-induced surface modification is very versatile to increase the adhesion or hydrophilicity
of polymer films. In this paper, the DBD is produced by repetitive unipolar nanosecond …

To reveal the mechanism of the survival and adaption of inoculated Lactobacillus plantarum
during ensiling. Alfalfa was ensiled directly (A1), after γ-ray irradiation (A0), and after …

Polymer materials, such as polymethylmethacrylate (PMMA), are widely used as insulators
in vacuum. The insulating performance of a high-voltage vacuum system is mainly limited by …

In this paper, an atmospheric-pressure dielectric barrier discharge is used to modify the
surface of the epoxy material and enhance the dissipation of surface charge to reduce the …

A charge-voltage Lissajous figure is a standard method for the electrical diagnostics of DBD
discharges. Based on a repetitive nanosecond-pulse generator, some experiments on …

Present one‐step N 2 fixation is impeded by tough activation of the N≡N bond and low
selectivity to NH 3 . Here we report fixation of N 2 ‐to‐NH 3 can be decoupled to a two‐step …

Pulsed discharge plasma and its application is one of the promising directions in civilian
areasof pulsed power technology. In order to promote the research and development ofthe …

This letter reports on experimental studies of a pulsed discharge in an inhomogeneous
electric field at a pressure of 1 atm for varying voltage pulse parameters. The amplitude of …