Combustion characteristics in a supersonic combustor with hydrogen injection upstream of a
cavity flameholder were investigated both experimentally and numerically. The combustion …

Large eddy simulation (LES) has been carried out to investigate a hydrogen-fueled scramjet
combustor with dual cavity, where a Reynolds-Averaged Navier–Stokes (RANS) model is …

This paper reports a numerical investigation on the effect of cavity geometry on fuel transport
and mixing processes in a scramjet combustor with a single rear-wall-expansion cavity. The …

Cavities are widely used as flameholders in supersonic combustors due to their outstanding
potential to stabilize combustion without excessive total pressure loss. A review of cavity-…

The cavity-based flameholder is a promising device in supersonic combustion issues in a
scramjet engine and it also provides a favorable ignition environment inside the cavity owing …

The injection and atomization process of a liquid fuel jet is critical for an ignition start of a
scramjet engine. Airwall-mounted crossflow injection strategy is widely used in scramjet …

Optical diagnosis-based combustion experiments were conducted to investigate the
characteristics of cavity assisted hydrogen jet combustion in a supersonic flow with a total pressure …

Combustion oscillations in a supersonic combustor with hydrogen injection upstream of a
cavity flameholder are investigated numerically using a hybrid RANS/LES (Reynolds-…

Pressure and flame oscillations in a scramjet combustor are investigated experimentally. In
cold flows, cavity oscillations appear to be dominated by Rossiter mode, and cavities with …

A multi-channel gliding arc (MCGA) plasma was used to enhance ignition and combustion
of ethylene fuel in a cavity-based scramjet combustor with an inflow speed of Ma = 2.92. …