Wax precipitation is one of the most important flow assurance problems. Unfortunately,
experimental data are very scarce to confirm existing models for prediction of such precipitation …

… temperature:(6) Δ m H i = c · M i · T m, i , where for a given n-alkane i, Δ m H i is the molar
melting heat (in J mol −1 ), M i is the molecular weight (in g mol −1 ) and T m, i is the melting …

… than 0%, the weight is less than 0 kg, the rainfall is less than 0 ml or greater than 1 ml (the
rain sensor does not pick up values greater than this amount), the wind speed is less than 0 m …

The blocking problems in equipment and flowlines caused by precipitation of wax solids is a
well‐known problem and large research efforts have been focused on developing …

To assess the impact of the application of the European League against Rheumatism (EULAR)
task force recommendations in the cardiovascular (CV) risk of a series of Spanish …

Wax precipitation at low temperatures in petroleum mixtures is one of the most important
problems in flow assurance. Experimental quantification of such processes and the further …

… The mean age of the entire patient population was 49 ± 8.77 years (range, 29 to 71 years)
and the mean body mass index was 26.14 ± 4.66 kg/m 2 (range, 17.58 to 40.6 kg/m 2 ). …

Wax precipitation and deposition in crude oils can produce flow assurance problems in
production and transportation operations. Knowledge of the wax appearance temperature (WAT) …

… %M ethyl oleate and 90%M ethyl laurate, respectively, indicating immiscibility in solid phase.
The difference between the melting points in the case of the system ethyl oleate and ethyl …

… the sample, as follows: (4)where m tc f is the mass of trapped crude oil in the precipitated
sample, m f is the mass of the precipitated fraction, m Ar f is the mass of aromatic compounds in …