The pyrolysis characteristics of three main components (hemicellulose, cellulose and lignin)
of biomass were investigated using, respectively, a thermogravimetric analyzer (TGA) with …

The past decades have seen increasing interest in developing pyrolysis pathways to produce
biofuels and bio-based chemicals from lignocellulosic biomass. Pyrolysis is a key stage in …

Firstly, the operating conditions were screened for biomass pyrolysis in a fixed bed with
respect to higher oil yield. A temperature of 600 C with an N 2 flow of 80 ml/min exhibited the …

Catalytic fast pyrolysis (CFP) is an attractive approach to convert biomass to high-quality bio-oil
through the deoxygenation of pyrolysis vapors in the form of H 2 O, CO, and CO 2 . …

To better understand biomass pyrolysis, the different roles of the three components (hemicellulose,
cellulose, and lignin) in pyrolysis are investigated in depth using a thermogravimetric …

To study the process of biomass-based pyrolytic polygeneration and its mechanism in depth,
the pyrolysis of cotton stalk was investigated in a packed bed, with focus on the evolution of …

Three main components of biomass were pyrolyzed individually in a closed reaction system
at 500–700 C for 60s and 90s. Then bio-oil heavy compounds were further analyzed with …

Recognizing that bioenergy with carbon capture and storage (BECCS) may still take years
to mature, this study focuses on another photosynthesis-based, negative-carbon technology …

Pyrolysis has created many (and will open more) possibilities for high-value utilization of
biomass. To obtain the optimal amount of desired pyrolysis products, especially high-quality bio-…

Carbon nanotubes were produced from post-consumer mixed waste plastics using a
pyrolysis-catalysis process. The catalysts used were Ni-Fe bimetals supported over four different …